白云石制备似立方体状方解石型碳酸钙晶体及其机理研究

以轻烧白云石粉、氯化铵和二氧化碳为原料,在未使用晶型控制剂的情况下,通过蒸氨-沉钙过程制备出了似立方体状碳酸钙。研究了反应温度、溶液中钙离子浓度、通气速率、搅拌速度以及陈化时间对碳酸钙中方解石相含量以及晶体形貌的影响,并探索了沉钙反应的晶型控制机理。结果表明,在反应温度40 ℃、钙离子浓度0.05 mol/L、通碳速率100 mL/min、搅拌速度400 r/min和陈化时间2 h的条件下,制备出形貌规整、粒径分布均匀的似立方体状碳酸钙,平均粒径为5~10 μm。该研究为提升白云石的使用价值、生产高附加价值的碳酸钙产品,以及提高白云石资源的利用率提供理论基础。     

Sentinel-2卫星的多光谱轻量级船舶目标检测算法

近年来深度卷积神经网络在可见光船舶检测方面取得了显著的进展，然而，大多数相关研究是通过改进大型的网络结构来提高检测性能，因此加大了对更高计算机性能的需求。此外，可见光图像难以在云、雾、海杂波、黑夜等复杂场景检测到船舶。针对以上问题，提出了一种融合红（red, R）、绿（green, G）、蓝（blue, B）和近红外（NIR）4个波段光谱信息的由粗到精细的轻量型船舶检测算法。与现有的方法中根据光谱特性利用水体检测算法提取水体区域不同之处是该算法是利用改进的水体检测算法来提取船舶候选区域。为获取更准确的候选区域，对船舶、厚云、薄云、平静海面、杂波海面5种场景中4个波段的像素值进行了统计分析，选取近红外大于阈值作为辅助判断，并以其中心点获取候选区域32×32大小的切片，并对切片进行非极大值抑制，由此获得了船舶粗检测结果。随后构建了轻量级LSGFNet网络对船舶候选区域切片进行精细识别。构建的网络融合了1×1卷积提取的波谱特征与3×3的提取几何特征，为防止光谱特征与几何特征的信息在融合时“信息不流通”，在LSGFNet网络中引入了ShuffleNet中的通道打乱机制，并减小了模型结构，与典型的轻量级网络相比具有更好的效果且模型较小。最后，利用Sentinel-2卫星多光谱10 m分辨率数据构建了512×512大小的1 120组数据进行粗检测，以及32×32大小的6 014组数据进行精细网络训练，其中候选区域粗提取的查全率为98.99%，精细识别网络精确度为96.04%，不同场景下的平均精确度为92.98%。实验表明该算法在抑制云层、海浪杂波等干扰的复杂背景下具有较高的检测效率，且训练时间短、计算机性能需求低。     

A posteriori error analysis of a quadratic finite volume method for nonlinear elliptic problems

In this article, we construct and analyze a residual-based a posteriori error estimator for a quadratic finite volume method (FVM) for solving nonlinear elliptic partial differential equations with homogeneous Dirichlet boundary conditions. We shall prove that the a posteriori error estimator yields the global upper and local lower bounds for the norm error of the FVM. So that the a posteriori error estimator is equivalent to the true error in a certain sense. Numerical experiments are performed to illustrate the theoretical results.     

体积应变对立方钛酸铅电子结构和光学性质的影响

本文利用第一性原理方法计算并分析了体积应变(-11%~11%)对立方顺电相PbTiO₃的结构、稳定性、电子结构和光学性质的影响。研究发现体积应变后PbTiO₃形成焓增大,稳定性下降,其中压应变对其稳定性的影响比拉应变大。当受到拉伸应变时,立方PbTiO₃由直接带隙半导体变为间接带隙半导体,且带隙随应变增大呈先增大后降低的趋势。在发生压应变时,从复介电函数、复折射率及吸收系数的分析结果可知,在自然光照下PbTiO₃的光吸收能力仅在个别波段有所增大,但总体呈减弱趋势,当产生拉伸应变时,介电峰、吸收峰红移,表明PbTiO₃在可见光范围内光吸收能力增强,并且当应变增大到11%时,PbTiO₃的吸收能力远高于本征立方相。     

水热法制备二氧化锡/钨酸铋复合光催化材料及其催化活性研究

本文用水热法制备了正交晶系的纳米球状结构的二氧化锡和正交晶系的由片状聚集成球状结构的钨酸铋,并且对二者进行了复合,制备出了二氧化锡/钨酸铋复合光催化材料。采用X射线衍射(XRD)、扫描电子显微镜(SEM)、比表面积测试仪(BET)、紫外可见分光光度计等技术对复合样品的结构、形貌、比表面积、孔容孔径和光学性质进行了表征。用碘钨灯模拟太阳光,分别以二氧化锡、钨酸铋和二氧化锡/钨酸铋复合材料为催化剂降解罗丹明B(RhB),研究所制备的二氧化锡/钨酸铋复合材料的光催化活性。光催化90 min时二氧化锡、钨酸铋和二氧化锡/钨酸铋对罗丹明B的降解率分别是9%、22%和30%。实验结果表明,在可见光下,二氧化锡/钨酸铋复合材料的光催化活性要高于单一的二氧化锡和钨酸铋。     

Euler Characteristics on virtually free products

We define Euler characteristics on classes of residually finite and virtually torsion free groups and we show that they satisfy certain formulas in the case of amalgamated free products and HNN extensions over finite subgroups. These formulas are obtained from a general result which applies to the rank gradient and the first L²?Betti number of a finitely generated group.     

A simple three‐wave approximate Riemann solver for the Saint‐Venant‐Exner equations

Erosion and sediments transport processes have a great impact on industrial structures and on water quality. Despite its limitations, the Saint‐Venant‐Exner system is still (and for sure for some years) widely used in industrial codes to model the bedload sediment transport. In practice, its numerical resolution is mostly handled by a splitting technique that allows a weak coupling between hydraulic and morphodynamic distinct softwares but may suffer from important stability issues. In recent works, many authors proposed alternative methods based on a strong coupling that cure this problem but are not so trivial to implement in an industrial context. In this work, we then pursue 2 objectives. First, we propose a very simple scheme based on an approximate Riemann solver, respecting the strong coupling framework, and we demonstrate its stability and accuracy through a number of numerical test cases. However, second, we reinterpret our scheme as a splitting technique and we extend the purpose to propose what should be the minimal coupling that ensures the stability of the global numerical process in industrial codes, at least, when dealing with collocated finite volume method. The resulting splitting method is, up to our knowledge, the only one for which stability properties are fully demonstrated.     

Interface‐fitted moving mesh method for axisymmetric two‐phase flow in microchannels

A boundary‐fitted moving mesh scheme is presented for the simulation of two‐phase flow in two‐dimensional and axisymmetric geometries. The incompressible Navier‐Stokes equations are solved using the finite element method, and the mini element is used to satisfy the inf‐sup condition. The interface between the phases is represented explicitly by an interface adapted mesh, thus allowing a sharp transition of the fluid properties. Surface tension is modelled as a volume force and is discretized in a consistent manner, thus allowing to obtain exact equilibrium (up to rounding errors) with the pressure gradient. This is demonstrated for a spherical droplet moving in a constant flow field. The curvature of the interface, required for the surface tension term, is efficiently computed with simple but very accurate geometric formulas. An adaptive moving mesh technique, where smoothing mesh velocities and remeshing are used to preserve the mesh quality, is developed and presented. Mesh refinement strategies, allowing tailoring of the refinement of the computational mesh, are also discussed. Accuracy and robustness of the present method are demonstrated on several validation test cases. The method is developed with the prospect of being applied to microfluidic flows and the simulation of microchannel evaporators used for electronics cooling. Therefore, the simulation results for the flow of a bubble in a microchannel are presented and compared to experimental data.     

Some methods of training radial basis neural networks in solving the Navier‐Stokes equations

The purpose of this research is to analyze the application of neural networks and specific features of training radial basis functions for solving 2‐dimensional Navier‐Stokes equations. The authors developed an algorithm for solving hydrodynamic equations with representation of their solution by the method of weighted residuals upon the general neural network approximation throughout the entire computational domain. The article deals with testing of the developed algorithm through solving the 2‐dimensional Navier‐Stokes equations. Artificial neural networks are widely used for solving problems of mathematical physics; however, their use for modeling of hydrodynamic problems is very limited. At the same time, the problem of hydrodynamic modeling can be solved through neural network modeling, and our study demonstrates an example of its solution. The choice of neural networks based on radial basis functions is due to the ease of implementation and organization of the training process, the accuracy of the approximations, and smoothness of solutions. Radial basis neural networks in the solution of differential equations in partial derivatives allow obtaining a sufficiently accurate solution with a relatively small size of the neural network model. The authors propose to consider the neural network as an approximation of the unknown solution of the equation. The Gaussian distribution is used as the activation function.     

A cost‐effective curvature calculation approach for interfacial flows on unstructured meshes

We present a simple and cost‐effective curvature calculation approach for simulations of interfacial flows on structured and unstructured grids. The interface is defined using volume fractions, and the interface curvature is obtained as a function of the gradients of volume fractions. The gradient computation is based on a recently proposed gradient recovery method that mimicks the least squares approach without the need to solve a system of equations and is quite easy to implement on arbitrary polygonal meshes. The resulting interface curvature is used in a continuum surface force formulation within the framework of a well‐balanced finite‐volume algorithm to simulate multiphase flows dominated by surface tension. We show that the proposed curvature calculation is at least as accurate as some of the existing approaches on unstructured meshes while being straightforward to implement on any mesh topology. Numerical investigations also show that spurious currents in stationary problems that are dependent on the curvature calculation methodology are also acceptably low using the proposed approach. Studies on capillary waves and rising bubbles in viscous flows lend credence to the ability of the proposed method as an inexpensive, robust, and reasonably accurate approach for curvature calculation and numerical simulation of multiphase flows.